Kawasaki Versys X-300 – Fairing Removal Quick Reference

This is just a short post outlining the removal of the front fairing for the Kawasaki Versys X-300 (2017).

Tools

  • 4mm allen key
  • 4 mm allen socket for ratchet with extension
  • 5mm allen key
  • 8mm and 10mm box end wrench
  • 8mm and 10mm sockets with ratchet extension
  • Small flat head screw driver (for pop rivets)

The Procedure

After removing the bolts indicated below, each plastic part should be able to be pulled away from the bike. In most cases there are plastic/rubber grommets which pop out when a little bit of pressure is applied. Be gentle and take your time and it should all come apart and go back together just fine.

Windshield Removal

Side / Tank Fairing Removal

Front Fairing Removal

Side / Front Fairing Removal

Turn Signal Assembly / Headlight Fairing Removal

Slideshow Summary of Versys X-300 Fairing Removal

  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal
  • Points Unknown - Kawasaki Versys X-300 Fairing Removal

Leave a Reply

%d bloggers like this: